[Mistake993]

my scrambler doesn't turn on after a being crash, no major damage! i just the replace the headlight bracket!
anyone got a tip? ecu reprogram?

 

[albymangled]

A little vague in your description...
doesn't turn on (as in no power when the key is turned?)
as in cranks but does not fire?

pls more detailed description of your situation..?

 

[Mistake993]

A little vague in your description...
doesn't turn on (as in no power when the key is turned?)
as in cranks but does not fire?

pls more detailed description of your situation..?

Sorry about my english!
when I turn the key my motorcycle does absolutely nothing, no crank, no dashboard, no lights, is absolutely die, I change the battery, fuse and relays checked.

 

[albymangled]

OK cheers..a little more to go on there. reading other threads on a similar theme one mentioned checking the earth lead where it goes onto the frame...worth a shot?

 

[Mistake993]

OK cheers..a little more to go on there. reading other threads on a similar theme one mentioned checking the earth lead where it goes onto the frame...worth a shot?

Thanks for the tip, i'll try that
I'll see how it goes.

 

[SicknTwisted]

When in doubt always check your grounds! A lot of issues are traced back to a simple grounding issue.
Good luck

 

[Mistake993]

I follow the ground cable from the battery to the starter and its ok, the battery is fully charged

 

[SicknTwisted]

I assume you already verified the kill switch is in “Run” position. On my new one it is also used to start it. Next check for tilt sensor. I’m not certain where it is located exactly but it will prevent start up if it “stuck” when the bike laid down.

 

[SicknTwisted]

Maybe you blew the “Main” fuse. Check that as well. No lights at all on dash would be a sign that fuse is blown