Ducati Scrambler Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
131 Posts
Discussion Starter · #1 ·
I am considering ordering some bar end weights and CRG mirrors, but I am not sure what is the bar diameter on the scrambler, anyone know?

These are the 3 choices available.

Size A - 13.50 mm to 14.90 mm (Ducati 848, Streetfighter, Hypermotard, Monster 1100, Benelli TNT, KTM Superduke, Rizoma bars***, etc)
Size B - 15.95 mm to 19.24 mm (Ducati 1199 panigale, 899, 1098, 696 etc) WILL NOT FIT BRUTALE and MV Agusta F4)
Size C - 19.25 mm to 24.50 mm (Some Ducati Monsters, MV F3, Multistradas etc)

This is the setup I am thinking about.

 

·
Registered
Joined
·
120 Posts
Yeah 17mm but I struggled to fit some bar end mirrors on the original bars - had to tap it in. Then changed the bars for the FT ones and it's a much better fit. Maybe my factory ones were 16.8mm? :)
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top