Ducati Scrambler Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
101 Posts
Discussion Starter #1
What lock would be the best to use for the Scrambler? I am looking at an ABUS chain in combination with a disclock.
 

·
Registered
Joined
·
40 Posts
I use the Oxford alarm disc lock, seams pretty decent as a deterrent anyway!
 
  • Like
Reactions: Dutch

·
Registered
Joined
·
198 Posts
You don't need the disc's "whole" or "hole" diameter when buying a motorcycle disc brake lock. The hole size is pretty much standard. But you need to look at if you are buying a bicycle or scooter disc brake lock the pin size will be smaller. But the concept is theft deterrent so having an alarm ringing when someone handles the lock is recommended to scare away thieves.

Kovix motorcycle disc lock - Motorbike Writer

I believe the scrambler's front or rear rotor an easily accommodate a disc lock pin of 14mm or roughly 1/2 inch.
 

·
Registered
Joined
·
198 Posts
I found this originally posted by Member Hui:
Front disc air holes are 8.1mm.
The rear disc has 7.49mm air holes.

If your lock has enough reach you could use (unusually) the floating bobbin holes which has a 6mm hole.
 

·
Registered
Joined
·
733 Posts

·
Registered
Joined
·
30 Posts
Looks great. The only thing I miss you can not combine it with a chain. They can "easily" lift the bike and put it in a van. I am looking more for a combination with a chain if I want to stall it for a longer period. But it looks very nice.
bikes go inside the house if im going to be gone longer than a day...
 

·
Registered
Joined
·
101 Posts
Discussion Starter #13
Hahahahaha, amazing. With a wheely and there you are. What a way to wake up and start laughing.... Great
 
1 - 13 of 13 Posts
Top