Ducati Scrambler Forum banner

1 - 8 of 8 Posts

·
Premium Member
Joined
·
2,624 Posts
The fixing is under the Scrambler logo badge,

Should look good Andy, look forward to seeing them , do you have a part number please ?
 

·
Registered
Joined
·
29 Posts
carbon wraped mine over the weekend, cost me £6 for the wrap and an hour fiddling about.
one screw under the tank badge, the panel then slides fwd, easy job.
 

·
Registered
Joined
·
29 Posts
used a hot air paint stripper on low very carefully LOL, this is the worst bit as there held with stong double sided tape.
the aluminium badges can bend if forced too much; i used a stanley blade to break the bond once soft enough.
 

·
Registered
Joined
·
61 Posts
used a hot air paint stripper on low very carefully LOL, this is the worst bit as there held with stong double sided tape.
the aluminium badges can bend if forced too much; i used a stanley blade to break the bond once soft enough.
Body shops use fishing line to "saw" emblems off on new vehicles when graphic wrapping or painting.
 
1 - 8 of 8 Posts
Top