[Saucehfd]

Ok i own an italia and my girl has a FT.
She wanted drag bars too. So i ordered some Krator 7/8" drag bars an began removing the stock FT bar (Why ducati cant sell the italia bars idk) when i ran into this.
What is the correct bar i need to order then because the middle is way thicker . These are 7/8" thru all the way. PLEASE HELP!!!!!
Ive attached some pics. Maybe another way around this. Ive never seen so little on the interwebs so maybe im silly for thinkin this is possible . No one sells scrambler drag bars specifically

 

[Max Kool]

You need 1 1/8" I guess?

Btw, would your gf sell the FT bars?

 

[Saucehfd]

Possibly after we get this on and if she likes em
Yeh

 

[Max Kool]

Ping me once you have found the proper bars. I might be interested.

 

[Deano968]

I can't believe you can't get Italia Bars... It's inconceivable that no one will every need to replace them. Weird.

 

[stavely]

FT bars are "tapered" or fat bars, they are 1 and 1/8th at the centre and 7/8 at the ends.
Icon and Enduro bars are 7/8 all the way.
So ducati fit different diameter mounts to suit.
You could buy some Icon mounts and use your current bar, or buy a fat/tapered bar and use your current mounts.
I have no idea what Italia bars are but it sounds like 7/8ths

 

[stavely]

P.S.
Lots of enduro/MX bikes use fat bars so try renthal or someone similar if you go that route.

 

[stavely]

P.P.S.
See this image, they'll pop straight in, 29mm is equivalent to 1 1/8th
RIZOMA Drag Bar Handlebar

HTH

 

[Jayswear]

Yep, tapered most likely! My Streetfighter's bars were tapered but my Scrambler's were not. I knew I was changing the bars so I got the Rizoma relocation kit and changed it all at once. The Rizoma kit requires tapered bars, and their bars are tapered as well. A little confusing. Would be nice to have a standard size for all, but I really like the taper. Seems like it deadens a little of the Scrambler's bar vibration.

 

[Riggins.33]

Where are you? I changed my bars from the standard 7/8 on the sixty2 to the FT bars and still have the old 7/8 mounts doing nothing.


Sent from my iPhone using Tapatalk

 

[Eshenbaugh]

Same here I have an original 7/8" riser/gauge assembly if you are interested.

 

[Max Kool]

If there's anyone interested, I hope to have the oversized bar clamps available as soon as I have received my Sled.