Ducati Scrambler Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1 (Edited)
Do anyone have a picture of an Evotech tail tidy on an Icon(mine is a 2019).
I need a picture from under the fender so I can see where the bolts are mounted.
Have saddle bags on mine so the 4 10 mm holes in the frame are occupied.

It is these holes that are occupied on my bike
44463
 

·
Registered
Joined
·
79 Posts
I don't have an icon but when I fitted mine to my sled is was pretty simple and shouldn't interfere with your saddlebag fittings.

Evotech are a really nice company, they're usually very happy to give advice and help over the phone. Maybe worth a call if you're unsure
 

·
Registered
Joined
·
20 Posts
Discussion Starter #3
I don't have an icon but when I fitted mine to my sled is was pretty simple and shouldn't interfere with your saddlebag fittings.

Evotech are a really nice company, they're usually very happy to give advice and help over the phone. Maybe worth a call if you're unsure
Not sure that the mounts are the same on yours and mine. If noone have a picture I will contact Evotech.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #5
Might not help but I suspect those are the bolts used, certainly on my Rizoma tail-tidy it's those four bolts (I have no luggage).
The picture is from the Rizoma installation sheet.
I had to dropy order at Rizoma.
Not sure that Evotech uses the same.
 
1 - 8 of 8 Posts
Top