I didn't realise you have to remove the whole casting to fit the cartridges. Doesn't mention that in the instructions, only how to remove the cartridge. I presume you have now managed to remove the screw holding the cartridge in.
Hi Scramblers just an update on the removal of the screw 5M worm screw that sits in the stub off the fork Leg.
I saw a video that said you had to use a 3 mm drill bit to drill out the 5M Worm Screw.
So I tried this new approach.
I took a 3 mm hex/allen nut and gently tapped it into the 5M worm screw.
Then I took my drill and with some very careful attempts it worked.
Sorry to revive an old post, but am in the process of changing my inner fork tubes due to rust and pitting, just getting my head round removing the inners from the bottom stub.
I can remove the worm screw and unscrew the tube, but i wanted to ask do i replace the 5m screw with a new one?
Also, do you use glue for the new tube?
Cheers
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ducati Scrambler Forum
99.3K posts
12.8K members
Since 2014
A forum community dedicated to Ducati Scrambler owners and enthusiasts. Come join the discussion about performance, accessories, exhaust, reviews, troubleshooting, maintenance, and more!