Ducati Scrambler Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter · #1 ·
Hi,

I'm curious if anyone on the forum has ground off the location pins from the handlebar controls to ease fitment of another set of handlebars.

If so, does grinding these pins off create problems attaching the controls securely?

If there's already a thread regarding this, please let me know.

Thanks,

Jay
 

·
Registered
Joined
·
1,530 Posts
Hi Jay,

I ground off the pins and used a bit of silicone tape on the bar to act as a shim, the switchgear hasn't wanted to slip at all.

Sarah
 

·
Registered
Joined
·
105 Posts
Discussion Starter · #3 ·
....I ground off the pins and used a bit of silicone tape on the bar to act as a shim, the switchgear hasn't wanted to slip at all...Sarah
Thanks Sarah. Next time I switch bars, I'll probably take them off.
 

·
Registered
Joined
·
41 Posts
I moved my bars back, this required the controls to be rotated.On advice in this forum, I ground the pins down so I could rotate them. Have not had any problems.
 
1 - 4 of 4 Posts
Top