Ducati Scrambler Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
34 Posts
I had a 1100 Scrambler and the joins leaked like mad from new. What i did was cut some thin exhaust mat and pushed it into one end of each pipe. "You'll see what i mean". I also has a leak from the weld at the Y section of the exhaust pipe. This can be seen when you first start the bike and condensation will leaking out. To me that is a exhaust leak. Pioes are cold and have more clearance. Wait until it is 100% cold. Start the bike, and quickly put the hand as close as you can to the exhaust joins. You have to curve your hands and fingers around the pipe though. You will feel it on your fingers or hand.
Don't forget, they are very mechanical sounding engine as well.
Hope that help.
 
1 - 1 of 1 Posts
Top