Ducati Scrambler Forum banner
1 - 1 of 1 Posts

150 Posts
Bottom line is how much knowledge do you have? To achieve this, electricals are not
so much of a problem they are flexible and easyish to 're route or hide . But throttle / clutch cables, not so easy, you'd probably need a shorter or shorten the exsisting one and need a good clean run no kinks no tight corners etc.
I agree lower bars , (I have the FT bars) leaves a large loop up front. I want to fit a screen later and I can forsee a problem.!
Tbh, take you time live with what you have then make changes.
Plenty of how too's on here tho. If you find away don't forget pictures!!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.