Ducati Scrambler Forum banner

Indicator Cree LED Bulb Upgrade

2727 Views 12 Replies 3 Participants Last post by  Derek
Been reading abit and have ordered these as a Turn signal upgrade
NEW 25W 7507/581/BAU15S/PY21W CREE LED CANBUS*** BULBS AMBER INDICATOR LIGHTS | eBay

Fingers crossed
1 - 7 of 13 Posts
There are cheaper LED ones I agree, but its the `Cree` ones that are brighter, totalling 25watts Cree Leds with 570 lms its also important to have the side fireing Cree Chips as well as a rear facing one, so the Silver reflector bounces the bright light. Ill do a write up with pictures when they arrive and after installation.
I can confirm that ............ They don't fit LOL !!
1: Wrong fitment, the pins on the Ducati Light are not diagonal they are 12oclock and 4 oclock.
I ordered the BA15S the Correct is BAU15S
2: These stick out too far so would not have fitted anyway :(

Back too the drawing board.
On a Plus note, I took delivery of the Scrambler 2 hours ago.
Allready fitted the rear Rack.
So...
Have now ordered these ones
2x Amber 9 SMD bulbs BAU15S INDICATOR SIGNAL BULB FRONT 581 PY21W LED | eBay

My goal is to have great Bright Turning Repeaters that other road users can see, a good bright Flash, not the lazy on/off
I hope so, I saw that someone else had these, but another member said they didn't look any different ? ill do a Video of before and after, for future owners reference, as ive spent hours trawling ebay and bulbs ! LOL !

THeres are these ones,
2x Renault Scenic MK1 24-LED Rear Indicator Repeater Turn Signal Light Bulbs | eBay

which would fit, but getting pricy, after my £25 wrong fitment disaster, I'm now on a budget
No, resisters as the blinker system is Digital and not based on the Watts
19 LED 581 BAU15S PY21W TURN SIGNAL OFFSET PINS AMBER REAR INDICATOR 12V BULBS | eBay

These Arrived this morning, tried one. Terrible, very low light output worse than the original bulbs :(
1 - 7 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top