Ducati Scrambler Forum banner

License Plate Holder

5951 Views 19 Replies 7 Participants Last post by  FullThrottleFrank
I just bought the Ducati Upper license plate holder for my Full Throttle. Just after i put it on my bike i notices it looks very stupid if you don t have a rear fender :-(

Attachments

See less See more
4
1 - 20 of 20 Posts
Looks like you will need a fender...
You could make a small carrier to go on there :)

Welcome to the forum Frank :)
You could make a small carrier to go on there :)

Welcome to the forum Frank :)
Good Idea :) and thanks!
Looks like you will need a fender...
I did order one allready. Hopefully it looks better than!
Elvisto,
What fender will work with that license plate holder?
Stu
the only one is the Icon, / urban Enduro, becaus Classic has already the plate on high mount
can you kindly post pics of fitting point on the bike frame? just to understand whether it use holes for side bags frames or not ty
Can't you refit the original mudguard Frank ?
he has not.... he has a FT, no rear fender at all
  • Like
Reactions: 1
he has not.... he has a FT, no rear fender at all
I never realised the FT had no rear fender!
You could make a small carrier to go on there :)

Welcome to the forum Frank :)
I think a carrier there would be useless, as it would block tailight if anything was carried there.

But a small homemade mudguard would be an easy solution.
Elvisto,
What fender will work with that license plate holder?
Stu
I ordered the one of the yellow Ikon. Will get it today and tell you how it looks like. I probably have to get it coloured though because the yellow is not the same like the yellow of the FT. Will see ...
can you kindly post pics of fitting point on the bike frame? just to understand whether it use holes for side bags frames or not ty
Of course i will just give me a bit of time!
  • Like
Reactions: 1
Hey Hedonism here are the pics. Hope you can see what you wanted to see!

Attachments

See less See more
2
  • Like
Reactions: 1
... and i was at my dealers place to pick up the new rear fender but this very smart guy ordered it in red instead of yellow as i told him :-( now i have to wait some more time ... by the way anybody from germany around? Just would like to know if there are better dealers in germany than mine. The shop i go to is more than unfriendly and very unprofessionell :-(
first of all ty for pics.

the icon yellow will not match with the FT one... take the red and wrap it in black
first of all ty for pics.

the icon yellow will not match with the FT one... take the red and wrap it in black
Yeah i know that i have to get a paint job on it anyway but i wanted to do that in the wintertime. And just put the yellow one on it at first. But there is no way to put a red one on it!
yeah... but the time you will wait for the yellow, you'll paint/wrap the red one ;)
yeah... but the time you will wait for the yellow, you'll paint/wrap the red one ;)
That s right!
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top