[ELVISTO]

Well done Gill looking good, nice job,
There's a hobby craft at Bridgemere Gardens Gill,
You need sticky stuff remover for the double sided foam, Halfords sell the foam in different thicknesses ,

 

[ELVISTO]

So ! You've had the lowered seat now ! have you ? what's it like Gill ?

Great write up and pics by the way,

 

[ELVISTO]

looks good vibration, welcome to the forum,

 

[ELVISTO]

I thought they were a rip off too Dave,

 

[ELVISTO]

I fitted the Classic logo, these are a lot more substantial than the Icon logos , look much nicer too, It only took me 40 min to do both sides,
First i heated them up with a small heat gun, sawed them off with fine twine, warmed the glue/foam and rolled it off with my thumb, Painted on sticky stuff remover, then went over to the other side while it soaked in ,

When I went back over, the glue etc had completely melted , just a few rubs with the credit card and a wipe over with brake cleaner and it was ready to fix the new logo,

Remember to tape a line around the top and side so you can put them back in a similar position ,

 

[ELVISTO]

Go for the carbon panels, thats a good deal