Ducati Scrambler Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
733 Posts
I fitted the Rizoma Screen with the standard Icon Bars and Speedo Position

I modified some brackets from a dart screen to start with - see below - then made an additional holder to reposition the GI Pro to the center (don't have a photo of that)

So If you can get hold of a second hand dart screen - some careful hand bending and it fits.


IMG_20160519_152821.jpg
IMG_20160519_152828.jpg
IMG_20160519_152843.jpg
IMG_20160519_152904.jpg
 

·
Registered
Joined
·
198 Posts
Discussion Starter #3
Thank you. I think the rizoma stuff must be compatible with the tapered 1 1/8 handlebar in the picture. The handlebar has the same dimensions like the OEM but is tapered.
 
1 - 3 of 3 Posts
Top