Ducati Scrambler Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hello girls and boys,
after neglecting my red icon in the last weeks I finally found the time to build a small screen.
It´s made of quite thick plexi-glass. I made a templet with paper, took a picture and reworked it via computer. Afterwards I cut it out with a jig saw and took a heat fan to warm and form it. Thinner material would have been better, because it´s easier to cut and form it.
It took me too evenings and about 10 Euro.
All together I´m quite happy with my prototype. How do you like it?

Erik
image.jpeg
image-4.jpeg
image-6.jpeg
 

·
Registered
Joined
·
146 Posts
Really like that, it looks right for the bike. Well done you must have an artistic flair to get it looking just right like that. Will try and copy it if that's OK.
 

·
Registered
Joined
·
1,530 Posts
Erik,

When you have the time could you post some close-ups of the mounting, please? Thanks again.

Sarah
 

·
Registered
Joined
·
5 Posts
Discussion Starter #10
Thanks a lot.
Cag, please copy. Improve it and let us see the results.
@ Sarah, here are your photos. It´s mounted on the bolts of the indicators. In my opinion there is not much more necessary because the screen leans on the speedo.
@ Geeza, great idea! I have to think about that...

Erik
IMG_3084.JPG
IMG_3085.JPG
 

·
Registered
Joined
·
1,530 Posts
Thank you! I'm thinking you will need a piece of foam or such between screen and speedo to protect the speedo housing, right?

Sarah
 
1 - 15 of 15 Posts
Top