Ducati Scrambler Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter #1
So ever since I put on Rizoma drag bars and a Classic seat I've had trouble with my seating position. Anytime I touch the brakes I start to slide right over the seat surface and up on the tank. I don't have this problem with my full throttle seat. Does anyone know of an easy way to make the leather on the classic seat.... Stickier?

I ride to work in a nomex flight suit (which means zero traction) and I feel like someday the bike will stop and I just won't haha
 

·
Registered
Joined
·
44 Posts
On a side note you can use techspec tank pads that can have the effect you require.

Sent from my SM-G930F using Tapatalk
 
  • Like
Reactions: jkeown

·
Registered
Joined
·
0 Posts
So ever since I put on Rizoma drag bars and a Classic seat I've had trouble with my seating position. Anytime I touch the brakes I start to slide right over the seat surface and up on the tank. I don't have this problem with my full throttle seat. Does anyone know of an easy way to make the leather on the classic seat.... Stickier?

I wondered if you might be able to share the part number was the Rizoma Drag Bars and confirm whether these can be directly swapped in for the FT bars without any other parts, spacers, risers?
 
1 - 3 of 3 Posts
Top