[mk3nippa]

Anyone out there got a set of these that can post some pics from above/behind or any other angle as there seem to be only 4 or 5 images out there I can find (Mugello & Winding Roads pics)?
Want to see if they interfere with rear indicators as well as the overall look on the bike.

Thanks in advance

Mk3Nippa

 

[32mill]

Hi
I have just received my Blaze Panniers from Winding Roads. Also bought the rack to hold a tail pack.
the cases are close to the indicators, but they can be moved slightly forward. They also come with a strap to stop them moving back.
The bags are very nice quality and come with waterproof liners.
One bad point for me was the right hand bracket has to share a bolt hole with the Termignoni exhaust bracket. This has a spacer which needs to be reduce by the thickness of the bracket you are about to add. This spacer is not supplied by SW Motech. (13mm Dia x 12mm long with a 6mm clearance hole through it.)
Hope the following photos help.

 

[mk3nippa]

Hi
I have just received my Blaze Panniers from Winding Roads. Also bought the rack to hold a tail pack.
the cases are close to the indicators, but they can be moved slightly forward. They also come with a strap to stop them moving back.
The bags are very nice quality and come with waterproof liners.
One bad point for me was the right hand bracket has to share a bolt hole with the Termignoni exhaust bracket. This has a spacer which needs to be reduce by the thickness of the bracket you are about to add. This spacer is not supplied by SW Motech. (13mm Dia x 12mm long with a 6mm clearance hole through it.)
Hope the following photos help.

Thanks for the pics 32mill

 

[Skulls]

Yes, thanks for the pics and the info. I've had my eye on those and it helps to see them sitting on a FT.

 

[62Yellow]

I went with a set of these from Revzilla, Very impressed with the quality, fit and function. They went on in minutes with very good instructions (and come off in minutes). Didn't have any issues mounting the rear peg plates for the bag support rods and fastech snaps using the two tapped holes on the back side of the castings. Very clever setup, pricey but you get what you pay for. I also got $20 Zilla bucks, no tax and free (fast) shipping!

Pics to add to the above....

 

[RodrigoGM]

Great post and pics @62Yellow and @32mill !
Had a few questions, and since you guys have had them for a while, wanted to get your opinion on:

• how comfortable is it for the passenger when the panniers are on? i.e. do they feel as if they are sliding out of the seat?
• do the panniers rub against the painted sides of the rear mudguard/tail section?

Thanks !