Ducati Scrambler Forum banner
1 - 1 of 11 Posts

· Registered
53 Posts
Your plate is massive but you might be able to do something similar to the way I set up my plate. I drilled holes in my plate, purchased some bolts to match the stock nuts, small spacers then reused a bolt and spacer from the provided parts, or that I took off elsewhere to prop the bottom up. I do still wish the light was lower, but it looks clean like this.

Tire Automotive tire Auto part Vehicle Grass
Land vehicle Vehicle Motorcycle Supermoto Motor vehicle
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.