Ducati Scrambler Forum banner

Troubleshooting a No-Start situation

16229 Views 28 Replies 6 Participants Last post by  CharlesB
So I just installed a Kaoko Throttle Lock on my Scrambler and wanted to go for a check out run, it's been sitting for 5 days and I go to start it and nothing happens when I hit the Start button, the digital clock lights up and checks it's system, the fuel pump primes up, gear selector is in N, kickstand light is ON, ABS and oil lights are ON and volts show as 12.9 with key Off and 12.5 with the key ON, I confirmed it with voltmeter and a battery charger, still it won't start. I checked all the fuses, tried starting it in gear with the kickstand up and the Light Off. I also fully charged the battery and checked the connections well. So what can I check now?
  • Like
Reactions: 1
1 - 9 of 29 Posts
SouthernIcon,

What exactly do you have to do to install the throttle lock? You'd think we have to be overlooking something simple. You didn't accidently hit the kill button did you?
Yes, any way that's in some sort of kink?

Sarah
So you turn on the key, you have all the lights and the pump primes, then you hit the Start button-- does it make any racket at all?

Sarah
I mean does the bike make any racket when you hit the button?

Sarah
I feel like something simple has stumped us, and I wish some other folks would chime in with suggestions.

Sarah
Hope they get right to it.

Sarah
Glad they called with an update and thank you for passing it along, but what in the world...

Sarah
Well, at least we didn't miss something completely obvious. Thanks for letting us know.

Sarah
SouthernIcon,

Bike up and running?

Sarah
1 - 9 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top