Ducati Scrambler Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 · (Edited)
Hi all,

I just purchased a kit but I am struggling with support and lack of proper documentation.

Is anyone here using Tuneboy on the forum who can help?

I have a FT with MWR power up and a Termi slip on. I flashed the file Scrambler_DPTune.dat provided to the ECU and now I can see "RACE" appearing on the dash when I turn the bike on. Curious to know if this is the same as the Term up-map or an optimised version and if the dealer would be able to spot the difference and invalidate the warranty..

Does anyone of you have the original map, in case I want to make a warranty claim? Can I disable the O2 sensors and delete error messages?

Thank you guys!

Luca
 

·
Registered
Joined
·
54 Posts
Hi all,

I just purchased a kit but I am struggling with support and lack of proper documentation.

Is anyone here using Tuneboy on the forum who can help?

I have a FT with MWR power up and a Termi slip on. I flashed the file Scrambler_DPTune.dat provided to the ECU and now I can see "RACE" appearing on the dash when I turn the bike on. Curious to know if this is the same as the Term up-map or an optimised version and if the dealer would be able to spot the difference and invalidate the warranty..

Does anyone of you have the original map, in case I want to make a warranty claim? Can I disable the O2 sensors and delete error messages?

Thank you guys!

Luca
AFAIK. not a geek
Dealer can only see file name, doubt warranty affected unless serious issue, airbox mods might be more obvious ?
Ask whoever file came from if it's same as Termi one.
Tuneboy adjust parameters info would be handy, I'm going to try JPDiag but not certain they've broken into MC3 ECU properly yet
Should be able to get orig file for you, cables here soon
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #4 ·
Thanks guys!

Yes the filter mod might be the thing to worry about.. Will wait an answer from Tuneboy as well.
 
1 - 5 of 5 Posts
Top