Ducati Scrambler Forum banner

1 - 20 of 25 Posts

·
Premium Member
Joined
·
876 Posts
Discussion Starter #1
I'm not a fan of the look of the Termignoni exhausts that are available and so I've been looking for other manufacturers systems that are available in the UK. And I seem to be having trouble finding who does what, where and when.

If you know who can supply/fit an aftermarket exhaust system in the UK I'd appreciate it if you could post a link so I can take a look and make a considered decision.

TIA
 

·
Registered
Joined
·
941 Posts
Why not one from Europe? The slip on style take 15 minutes top to fit... child can do it :)
 

·
Registered
Joined
·
342 Posts
You might consider this}
Virex by McRacing Srl about 400 euro delivered to your door
Or this}
SC-Project Shop Ducati - SCRAMBLER - Conic silencer Same price

Both those companies offer other slip/ons too, all on those web sites. Homologated for EU use and with removable baffles.
Swapping out the original heavy silencer and cat for any of these really is only a 30 minute job, just go steady and it might be 35 minutes!
 

·
Registered
Joined
·
733 Posts
Yes - but if you take of the CAT - you really will need to remap as it will run lean

So yes its a 30 minute job for the change - but the tuning needs to be done by a specialist - ideally on a rolling road.
 

·
Registered
Joined
·
941 Posts
Yes - but if you take of the CAT - you really will need to remap as it will run lean

So yes its a 30 minute job for the change - but the tuning needs to be done by a specialist - ideally on a rolling road.
The Rexxer takes care of the tuning and I agree its a must do if CAT going walkies :)
 

·
Premium Member
Joined
·
876 Posts
Discussion Starter #9
You might consider this}
Virex by McRacing Srl about 400 euro delivered to your door
Or this}
SC-Project Shop Ducati - SCRAMBLER - Conic silencer Same price

Both those companies offer other slip/ons too, all on those web sites. Homologated for EU use and with removable baffles.
Swapping out the original heavy silencer and cat for any of these really is only a 30 minute job, just go steady and it might be 35 minutes!
I'm quite liking the Virex jobby but I'd like to see more if anyone has some links :)
 

·
Premium Member
Joined
·
613 Posts
Both the Virex and SC-Project units are Italian-Made.

If you are looking for a UK manufactured unit (Derbyshire) then the Scorpion Serket Taper fits the bill.



DUCATI - 800 - 15-Current
 
  • Like
Reactions: Geeza

·
Premium Member
Joined
·
876 Posts
Discussion Starter #11
Not necessarily looking for uk manufactured.......just something available in the uk. I'm having trouble finding anything (that I like) and normally my googling skills are pretty good.
 

·
Registered
Joined
·
941 Posts
Not necessarily looking for uk manufactured.......just something available in the uk. I'm having trouble finding anything (that I like) and normally my googling skills are pretty good.
Dont limit yourself like that. Many of us in UK have ordered from other countries with no issues. In my case I ordered the SC Projects Conic direct from The manufacturer in Italy
 

·
Registered
Joined
·
342 Posts
Dont limit yourself like that. Many of us in UK have ordered from other countries with no issues. In my case I ordered the SC Projects Conic direct from The manufacturer in Italy
TC3 can you post any pics of your SC-Project on the bike?
Is the clearance to the rear footrest OK and does it give more room to your right heel? Mine hits the std. pipe when i sit back a bit
 

·
Registered
Joined
·
941 Posts
TC3 can you post any pics of your SC-Project on the bike?
Is the clearance to the rear footrest OK and does it give more room to your right heel? Mine hits the std. pipe when i sit back a bit
Only pic I have on my phone is this and am away from pc for a week. I remember my right heel touched the stock exhaust but it has not touched the Conic. Cant comment about rear footrest clearance as never take a pillion. Its a great quality exhaust and well priced too

 
1 - 20 of 25 Posts
Top