Ducati Scrambler Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Hi guys,

here some pics of my beautiful Icon!! This is just the first step of my customization...
Hope u will like it...

Here below my modification (till now):

-Front fender black matte (Ducati UE).
-Plate holder racing (Ducati).
-Rims (Ducati UE).
-Tyres (Continetal TCK).
-Handle bar (Ducati FT) with Grips, bar end mirror and bar end Black and Golden (Rizoma).
-Engine shield (Ducati UE).
-OFFROAD pedal(Ducati).
-Exhaust (SC-Project).
-Light grille (Ducati UE).
-Wind shield (Ducati).
-Seat coating and saddle bag in cow leather 2mm with embroidered Ducati logo.
 

Attachments

·
Registered
Joined
·
14 Posts
Discussion Starter · #3 ·
Where did you get that clamps and brace on your handlebar?
Do u mean the one for the cross bar??

In that case i used the original clamps but i bought a longer crossbar (Tommaselli).
U must be careful... Too short doesn't fit (like the original), too long doesn't fit as well!!

I think u can also buy a new crossbar with relative clamps (like i did)... but i didn't like the clamps so i used the one from the original crossbar (Ducati).

:BangHead:
 

·
Registered
Joined
·
1,530 Posts
Nice, Marco! When you have time, snap a picture giving us full view of the bike and exhaust. Which SC-Project is that? Thanks.

Sarah
 

·
Registered
Joined
·
941 Posts
I like the CRT pipe but opted for the Conic. From what I have read you are running a bit of a risk with a race pipe in Italy. Maybe your area is a bit less strict?
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #7 ·
I like the CRT pipe but opted for the Conic. From what I have read you are running a bit of a risk with a race pipe in Italy. Maybe your area is a bit less strict?
U are right!! It is a bit risky here in Italy but i need to hear that sound!! :angry4:
What about you country? Can u use any kind of pipe???

Now im trying to build an handmade DB-Killer cause like that is really strong that sound!!!
 

·
Registered
Joined
·
941 Posts
U are right!! It is a bit risky here in Italy but i need to hear that sound!! :angry4:
What about you country? Can u use any kind of pipe???

Now im trying to build an handmade DB-Killer cause like that is really strong that sound!!!
I was born and live in England but my parents are Italian and are in Cosenza :)

In the UK as in a lot of europe you should not use a race pipe on the roads which is why I went with the Conic as they are road legal in regards to sound with the baffle in. Pop the baffle out and it becomes for road use apparently ...
 

·
Registered
Joined
·
941 Posts
I was born and live in England but my parents are Italian and are in Cosenza :)

In the UK as in a lot of europe you should not use a race pipe on the roads which is why I went with the Conic as they are road legal in regards to sound with the baffle in. Pop the baffle out and it becomes for race use apparently ...
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #10 ·
Yes i know... But i much more like the CR-T shape!!

Anyway the sound is GREAT!!!!!

Nice place Calabria!!! I lived in London for 1years in 2013!!!
 

·
Registered
Joined
·
29 Posts
Hi guys,

here some pics of my beautiful Icon!! This is just the first step of my customization...
Hope u will like it...

Here below my modification (till now):

-Front fender black matte (Ducati UE).
-Plate holder racing (Ducati).
-Rims (Ducati UE).
-Tyres (Continetal TCK).
-Handle bar (Ducati FT) with Grips, bar end mirror and bar end Black and Golden (Rizoma).
-Engine shield (Ducati UE).
-OFFROAD pedal(Ducati).
-Exhaust (SC-Project).
-Light grille (Ducati UE).
-Wind shield (Ducati).
-Seat coating and saddle bag in cow leather 2mm with embroidered Ducati logo.
That saddlebag looks great. Where did you get it?
Thanks
 
1 - 12 of 12 Posts
Top