[Merlinmerkin]

Just got a good deal on the complete zard high pipe with the headers. Does anyone know if the pipe comes with O2 sensor bungs like my stock exhaust with the FT Termi? If not, what do I do?

 

[Merlinmerkin]

Just called Bellissimoto and they opened one up for me and checked. It DOES have the O2 sensor bungs so it's pretty much plug and play.

 

[CookieKing]

Just called Bellissimoto and they opened one up for me and checked. It DOES have the O2 sensor bungs so it's pretty much plug and play.

I might be interested in your factory header components if you are getting rid of them.

 

[ELVISTO]

Post a picture when you get them Merlin, if you don't mind please,

 

[Merlinmerkin]

I might be interested in your factory header components if you are getting rid of them.

I may end up keeping them in case I get stopped and the officer notices I don't have a cat. I'll let you know after I get the Zard set up on.

 

[Merlinmerkin]

Post a picture when you get them Merlin, if you don't mind please,

Will do.

 

[Let The Good Times Roll]

Merlinmerkin or anybody - could you tell me the size of the thread for the O2 sensors please. I am thinking of getting a Rexxer reflash and I want to supply my own bungs/blank offs after the removal of the O2 sensors.
Much appreciated if somebody could measure their header pipes (that have been removed to fit a high pipe).
Regards - Ray

 

[Merlinmerkin]

I will measure when I take mine off. Almost sure it's common spark plug size. Maybe, haha.

 

[ELVISTO]

Think you may find it finer than Spark plug thread, Maybe a gas thread or metric fine ,

 

[Let The Good Times Roll]

Merlinmerkin - I would appreciate that. I have looked through Ebay but cant narrow it down to a Scrambler. There are kits that use a 12mm x 1.25 pitch and 18mm x 1.5 pitch (from memory). On some other Google searches the spark plug size pops up as well. I suspect the Scrambler is one of those but not necessarily.
Thanks again - kind regards Ray.