Ducati Scrambler Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
55 Posts
Merlinmerkin or anybody - could you tell me the size of the thread for the O2 sensors please. I am thinking of getting a Rexxer reflash and I want to supply my own bungs/blank offs after the removal of the O2 sensors.
Much appreciated if somebody could measure their header pipes (that have been removed to fit a high pipe).
Regards - Ray
 

·
Registered
Joined
·
55 Posts
Merlinmerkin - I would appreciate that. I have looked through Ebay but cant narrow it down to a Scrambler. There are kits that use a 12mm x 1.25 pitch and 18mm x 1.5 pitch (from memory). On some other Google searches the spark plug size pops up as well. I suspect the Scrambler is one of those but not necessarily.
Thanks again - kind regards Ray.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top