Yes it will. I have the same exhaust on my scrambler 1100 pro and still have the cat (although I am in the process of swapping it out for a decat midpipe) this exhaust is also standard on the club Italia which is a modified 1100 sport pro with a few bells and whistles and snazzy paint!

 

Hey man I love that gas tank “ducati” logo. Is that stock with the bike or did you get that ordered and manually installed? Please let me know I’d love to do this with my bike!

 

Thank you. Do you like it?

 

I love the look of it.

The sound is also good with nice character and the odd overrun pop, but I was hoping for a bit more volume. I had it fitted from new so haven't had a chance to compare with stock. But I have heard it mentioned on this forum that the road legal termi is a little quieter than stock but this was talking about the nonPRO 1100.

I would like a little bit more volume and a bit more popping which I'm hoping I'll get with the decat midpipe I'm hoping to fit.

If I was doing it again I'd probably go for the termi race system as by all accounts that has a nice loud volume and also comes with the remap which is meant to make the bike more responsive.

If you do end up getting one I'd love to hear your thoughts compared to stock.

 

The stock one actually sounds pretty good considering it is stock. It isn't terrible looking either but the Termignoni one seems to fit the character of bike better. For me, it would be a lot to spend for a relatively minor improvement performance wise and a moderate change aesthetic wise. Tells you how good the bike is ... there aint anything i really want to change

 

Absolutely, if you're spending money I'd spend the extra 30% or so and go for the full race system.

I just got it as it was thrown in for free by the dealer during negotiations! And I'd always regretted not getting the termi in my previous monster.

 

I bought the Ducati Rizzoma show bike with the same exhaust on it. Love the popping and noise 🥰🥰🥰 can’t beat termi 😂😂
Currently taking my Iam Masters and my mentor fitted a headset to my helmet… he asked this week if I could have got a louder exhaust😊

 

You could have, but it would be rude... 😁

 

😂😂

 

 

Hello - saw the straps you have above the exhaust, and was wondering where you got those and if you can recommend.


I wanted to get some type of strap on the other side of dual termis, so I can connect a helmet lock.

Thanks!

 

Best loosing the catalytic converter great weight loss

 

Stickers look great! Just ordered for my SP too ;-) Thanks

 

Be careful with stickers.. it can get out of hand. This is what mine looks like now

 

Be careful with stickers.. it can get out of hand. This is what mine looks like now View attachment 49809
View attachment 49808

Great job on the stickers, just done the logo one 😉

Be careful with stickers.. it can get out of hand. This is what mine looks like now View attachment 49809
View attachment 49808

Sticker done, love the new look!

 

Wow what a gorgeous bike💕♥

 

Wow what a gorgeous bike💕♥

Thank you! Yours is a stunner too! Love the yellow!

I've never really been into black bikes but wanted the Ohlins on the sport pro so got it and then tried to inject a bit of colour to it!

 

Cheers. You succeeded in injecting colour.. just the right amount👍 Where did you get the seat it’s fantastic?

 

Thanks! For the seat I bought a cheap used seat off eBay and got Chris Bugg at Custom Motorcycle Seats | Nostalgia Upholstery based in Peterborough to reupholster to my design. Absolutely fantastic bloke and cost about £140 including the logo embroidery so a bargain. Can't recommend him enough.

I kept the standard brown Sport Pro seat as a spare so can put I back to stock if needed.

 

Thanks! For the seat I bought a cheap used seat off eBay and got Chris Bugg at Custom Motorcycle Seats | Nostalgia Upholstery based in Peterborough to reupholster to my design. Absolutely fantastic bloke and cost about £140 including the logo embroidery so a bargain. Can't recommend him enough.

I kept the standard brown Sport Pro seat as a spare so can put I back to stock if needed.

 

He did an amazing job🥂🥂

 

I love your bike.

What is funny to me, is that Ducati spent a lot of effort trying to make "Scrambler" the brand, and not associate it with Ducati proper. Most owners though, really like being part of the Ducati heritage. I think they are missing out by downplaying the Ducati name.

 

Absolutely, and you can see they have back tracked a little by having a big Ducati logo on the 1100 Tribute Pro

But then the Scramblers lend themselves to customisation so well it's easy to add what you like to them!

 

So confirming the 96481451A part swaps on without any additional modifications correct?
Not seeing too much literature and you guys are all I have 😘

also, does anybody know if the stock manifold vs race exhaust manifold are a straight swap and will work w this slip on also?

 

So confirming the 96481451A part swaps on without any additional modifications correct?
Not seeing too much literature and you guys are all I have 😘

also, does anybody know if the stock manifold vs race exhaust manifold are a straight swap and will work w this slip on also?

I don't think this will work as the race manifold uses different size tubing. If you want more sound with the aproved Termi slip on just replace the cat with a decat pipe that's suitable for your model and year and don't forget to get a servo delete by Healtech. No experience with the newer single sided exhaust set ups though so double check everything but there should be a decat link pipe by now for the newer models.

 

Yep, that is the type approved termi slip on that should fit without any modifications. Not sure about the manifolds though.

And remember if you change the cat pipe then you will need an exhaust servo eliminator to stop any error codes coming up. I used a healtech one.

 

Good job ! Now i'm gonna mimic you!
If you have the ebay links...

And sorry for The off topic...

 

Good job ! Now i'm gonna mimic you!
If you have the ebay links...

And sorry for The off topic...

Thank you so much for your comments, the colours were inspired by the Ducati breeze jacket I have

The eBay link is

Pardon our interruption...

I bought the 12mm width in red and white, it was very easy to apply and also comes off without any damage to paint as I had to redo a section that wasn't aligned right.

Do put some pics of your bike after you've done it or reach out on Instagram as I'd love to see your bike too.

Good luck!

 

Thx very much, that's exactly what I want to do , my jacket has blue and white bands....

 

Post some pics when you do!

 

Hi here are some pics, It's the same concept with a different color, I have to adjust some strips and add the colors in a square format on the wheels ==> All like you !
I also put the devils' detail !

This color is more or less the same of my helmet and leather jacket
Tank panel and wheels are the next step

 

Looks fantastic 😍
The tank panel takes time and patience! Good luck.

And the devil's detail is always a nice touch 😉

I am struggling a bit with the wheel squares as they keep lifting at the edges. I might cut them shorter so they are just on the flatter part of the wheel rather than wrapping on the side lips.

 

Ok thks for the trick, for the tank panel i'm gonna use some cutting tape knife : https://www.aliexpress.com/item/100...html?spm=a2g0o.order_list.order_list_main.5.21ef5e5bc66y8R&gatewayAdapt=glo2fra